Flowserve Logix 3200MD Plus - Page 61

Logix
®
3200MD+ Digital Positioners FCD LGENIM0110-0 05/16
flowserve.com 61
3200MD+ Installation, Operation,
Maintenance, and Safety Manual
Revision History
Approvals (Signatures required for changes to Section 3)
Name
Signature
Date
Rev
Kent Woolf (author)
Ken Beatty
Jeff Taylor
Steve Christiansen
Doug Forman
Distribution
Name
Function
Doug Forman
Engineering
Nate Higbee
Engineering
Dave Nagel
Engineering
Ed Silva
Engineering
Mike Yost
Engineering
Mitch Price
Engineering
Brent Lingwall
Engineering
Edwin Hordijk
Sales
Ricardo Tozzi
Sales
Kalpesh Solaki
Sales
Mike Waier
Sales
Chin Thye Boo
Sales
Dmitry Gerasimov
Russian Translation
Darren
Russian Translation
Description
Date
Rev
Initial Draft
March 12, 2011
A
Changed UI figures. Change Hazardous Location Certs to remove IS and
NI references per Steve C. Changed Model Code Chart
February 3, 2016
B
Added note to model code chart on page 54 that says M20 Threads are
not available for certification code 34 and added the same note on page
25. Changed certification labels on page 14. Updated Table 11 on page
12 and put IS and NI back in.
April 14, 2016
C
Changed certification labels on page 14. Updated Table 11 on page 12.
Updated Table 11 on page 13
April 27, 2016
D
Removed SIL reference from Table 18
May 16, 2016
E
Changed Figure 33 for better clarification about cable placement and
revised Section 14.3, Installation Step 3 for better explanation. Added
Disposal Instructions (Section 1.9)
May 17, 2016
F
Fixed the text in Section 9.3 to make it clearer. Fixed Table Numbers
May 20, 2016
G
Changed the beginning sections and reformatted as directed by new
Corporate template. Added Mike Samuels’ edits.
May 31, 2016
H
To Do Next Revision:
This page not to be published.