Flowserve Logix 3200MD Plus User Manual

Logix
®
3200MD+ Digital Positioners FCD LGENIM0110-0 05/16
flowserve.com 36
26 REMOTE MOUNT
26.1 Remote Mount Opereation
The remote mount option can be used where excessive
vibration or environmental factors prevent the placement of
a positioner directly on the valve.
The remote mount unit consists of just the feedback
mechanism enclosed in a sturdy container. This assembly
is mounted to the valve/actuator assembly. The actuator
tubing and feedback signals are routed some distance to
the positioner. Tubing is connected to the positioner. The
feedback signal wires are connected to a remote mount
board installed in the Logix
®
3200MD+ positioner. See
Figure 31.
Table 18: Remote Mount Cross-References
Information
Section
Page
Electronic
Specifications
16.6 Remote Mount Specifications
12
Electronic
Connections
20.4 Remote Mount
26
Ordering a
Remote Mount
Board
31.2 Spare Parts Kits
56
Ordering a
Remote Mount
Device
30.1 Positioner Dimensions
53
For more information on the remote mount option, see
Logix®
®
Remote Mount Option user instructions, FCD
LGENIM0001.
Figure 31: Remote Mount Terminals
Terminals

Flowserve Logix 3200MD Plus Specifications

General

Brand	Flowserve
Model	Logix 3200MD Plus
Category	Valve Positioners
Language	English