Chapter 4: Maintenance
Periodic Maintenance
52 Hyperion Imaging System: User Guide
72BReplace the Injector Sealer Cap
Replace the Injector Sealer Cap if required (PN 105350). You will also need an O-ring, which
is included in the O-Ring Kit, Torch Body (PN 105641).
1 I
nsert the O-ring into the cap. Ensure that the O-ring is firmly seated in the inner cap and
the center opening is unobstructed.
Injector Sealer Cap
O-ring
Injector sealer cap
To Next Page
Loading...
