Fluke 120B Series User Manual

Industrial ScopeMeter®
Scope and Meter Mode
31
3. Push  to highlight A in the Trigger Input group.
4. Use YZ to highlight the Update as On trig.
5. Push  to make the change.
6. Push 4 to accept all trigger selections and return
to normal measurement.
To autorange on signals down to 1 Hz:
1. Push  to open the MENU.
2. Use
YZ to highlight USER OPTIONS.
3. Push  to open the USER OPTIONS MENU.
4. Use
YZ to highlight Autoset Settings.
5. Push  to open the USER > AUTOSET MENU.
6. Use
YZ to highlight the Search For Signals as
> 1 Hz.
7. Push  to make the change.
8. Push  to close all menus.
Note
Setting the automatic triggering to >1 Hz will
slow down the auto range.
The Information area updates with:
Wait
no trigger found
ON TRIGGER
screen updates only when valid
triggers occur
Note
Gray text in a menu or button bar indicates that
the function is disabled or the status is not valid.
1.888.610.7664 sales@GlobalTestSupply.com
Fluke-Direct.com

Fluke 120B Series Specifications

General

Brand	Fluke
Model	120B Series
Category	Measuring Instruments
Language	English