1730
Users Manual
6
Tilt Stand
The power supply includes a tilt stand. When used, the tilt
stand positions the display at a good angle for use on a
tabletop surface. To use, attach the power supply to the
Logger and open the tilt stand.
Hanger Accessory
The optional hanger accessory shown in Figure 2 is used
to:
• Hang the Logger with power supply attached (use two
magnets)
• Hang the Logger separately (use two magnets)
• Hang the power supply separately (use one magnet)
hcf058.eps
Figure 2. Hanger Accessory
To Next Page
Loading...
Need help?
General
