1730
Users Manual
16
Power from Battery
The Logger can operate on battery power without a
connection to the power supply or dc power cord. Push .
The Logger turns on and is ready to use in <20 seconds.
The battery symbol in the status bar and the power LED
indicate the battery status.
Table 5. Power/Battery Status
Logger On Logger OFF
Power
Source
Battery
Symbol
Power LED
Estimated Runtime for LCD
Hours:Minutes
Power Source Battery Status Power LED color
Off
Brightness
low
Brightness
high
Mains Charging Blue
Mains
green
NA
Mains off OFF
Battery
yellow
5:30 4:50 3:45
Battery
yellow
Battery
yellow
Battery
yellow
Battery red
0:18 0:16 0:12
Logger Status
not logging steady
logging flashing