1730
Users Manual
32
4. Push to toggle between a 12 hour or 24 hour
format. A preview of the configured date format shows
on the display.
5. Push to confirm the selection.
To change the time:
1. Use the + and – touch targets for each field.
2. Push to confirm the change and exit the screen.
Currency
The currency symbol used for energy cost values is
configurable.
To set the currency:
1. Push .
2. Push (Instrument Settings).
3. Push to highlight or touch Currency.
4. Select one of the currency symbols and push .
5. If a currency is not in the list, select Custom and push
or touch Edit Custom target.
6. Enter a three-letter currency code with the keyboard
and accept with .
7. Push to confirm the selection.
Touch Screen Calibration
The touch screen has been calibrated at the factory before
shipment. In case you do experience misalignment with
the touch targets, use the touch screen calibration feature.
To calibrate:
1. Push .
2. Push (Instrument Settings).
3. Push (Tools).
4. Push to highlight the Touch Screen Calibration
target.
5. Push to open the calibration screen. Or, touch the
Touch Screen Calibration target to open the
calibration screen.
6. Follow the on-screen instructions to touch five targets
in sequence.
The Logger reboots to complete the calibration.
Note
Touch screen calibration is not available when a
logging session is active.
To Next Page
Loading...
Need help?
General
