1730
Users Manual
8
How to Charge Battery
The Logger also operates on an internal rechargeable
Lithium-ion battery. After you unpack and inspect the
Logger, fully charge the battery before first use.
Afterwards, charge the battery when the battery icon on
the screen indicates that power is low. The battery
automatically charges when the Logger is connected to the
mains power. The Logger continues to charge when
turned off and connected to mains power.
Note
The battery charge is faster when the Logger is
turned off.
To charge the battery:
1. Connect the mains cord to the ac input socket on the
power supply.
2. Fit the power supply to the Logger or use the dc power
cord to connect the power supply to the Logger.
3. Connect to mains power.
Caution
To prevent damage to the Product:
• Do not leave batteries unused for extended
periods of time, either in the product or in
storage.
• When a battery has not been used for six
months, check the charge status and
charge the battery as appropriate.
•
Clean battery packs and contacts with a clean,
dry cloth.
•
Battery packs must be charged before use.
•
After extended storage, it can be necessary to
charge and discharge a battery pack to obtain
maximum performance.
•
Dispose properly.
Note
• Li-ion batteries keep a charge longer if stored
at room temperature.
• The clock resets when the battery is
completely discharged.
• When the Logger shuts off because of low
battery, enough battery capacity is available to
back up the real-time clock for up to 2 months.
To Next Page
Loading...
Need help?
General
