1730
Users Manual
30
Note
It is not possible to review a completed logging
session when another session is active.
2. Push (Delete) to remove the selected logging
session. Push to remove all logging sessions.
Note
An active logging session cannot be deleted. Stop
the logging session before you delete.
3. Push (Save to USB) to copy the selected
logging session to an attached USB flash drive. The
session is stored on the USB flash drive in the folder:
\Fluke1730\<serial number>\sessions
Screen Capture
In this screen you can review, erase, and copy saved
screens to a USB flash drive.
1. Push .
2. Push (Screen Capture) to show the list of all
screens. See Basic Navigation for information about
how to capture screens.
3. Push to move the screen highlight to a screen of
interest. A thumbnail image of the screen is shown for
easy identification.
4. Use (Delete) to delete the selected screen.
Push to delete all screens.
5. Push or (Save All to USB) to copy all screens to
an attached USB flash drive.
Instrument Settings
The Logger has settings for language, date and time,
phase information, firmware version and update, and
calibration.
To change the settings:
1. Push .
2. Push (Instrument Settings).
Language
The user interface of the Logger is available in Czech,
Chinese, English, French, German, Italian, Korean, Polish,
Portuguese, Russian, Spanish, and Turkish.
To change the display language:
1. Push .
2. Push to move the screen highlight to language
field.
3. Push to activate language field.
4. Push to move through the language list.
5. Push to activate the new language.
The language immediately updates on the screen.
To Next Page
Loading...
