1
1735 Power Logger
Introduction
With this 1735 Power Logger (referred to throughout this manual as “Logger”)
you can conduct voltage, current and power studies for determining existing
loads. This information can be used for architecture or electrical inspector
requirements in remodeling projects. The Logger is also a general-purpose
power quality investigative tool that reveals the quality of voltage supply at
any point in a distribution network.
The Logger was developed in particular for plant electricians and electrical
installers, who have an important role in investigating and solving disturbances
of the power distribution system.
Your 1735 Power Logger is equipped with Flash Technology. This enables
you to perform firmware updates. Please use the Windows Flash Update utility
to do this. You will find it on the supplied 1735 CD-ROM. If there is a
firmware update, it can be found on the Fluke website: www.fluke.com.
Symbols
Table 1 lists the symbols used on the instrument and/or in this manual.
To Next Page
Loading...
