Power Logger
Basic Operation
11
Basic Operation
The following examples show how to select parameters in the menu.
• Entering the main menu: M
• Selecting menu options with the cursor control keys: 2 1
<Enter>go to marked submenu
<ESC> back to the previous menu level
edx008.eps
Changing parameters:
• The displayed parameters can be modified with the cursor control
keys (in the available preset values).
• If values are not preset you can modify them by using the cursor
control keys. With 4 5 you can select the decimal place and with 2
1 you can modify the number.
Note
Selected parameters are stored in the memory with Enter. With ESC
the adjusted value can be rejected at any time.
To Next Page
Loading...
