EasyManua.ls Logo

Fluke 1735 - Temperature ranges; EMC; Safety; Specifications

Fluke 1735
84 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
1735
Users Manual
52
Note: the above terms are defined in European Standards. To calculate the
specification at any point in the working temperature range, use the
temperature coefficient below.
Temperature coefficient: ± 0.1 % of the measured value per K.
Intrinsic error: Refers to reference temperature, max.
deviation is guaranteed for 2 years.
Operating error: Refers to operating temperature range,
max. deviation is guaranteed for 2 years.
Climatic class: C1 (IEC 654-1)
-5 ° to +45 °C, 5 % to 95 % RH, no dew
Housing: Cycoloy shock and scratch proof
thermoplast V0-type (non-flammable) with
rubber protection holster
EMC
Emission: IEC/EN 61326-1:1997 class B
IEC/EN 61326-1, amendment 1: 1998
Safety
Safety: IEC 61010-1 600V CAT III, double or
enforced insulation, pollution degree 2
Protection: IP65; EN60529 (refers only to the main
housing without the battery compartment)
Specifications
RMS values are measured with a 20-ms resolution.
V-RMS Wye measurement
Measuring range: 57 / 66 / 110 / 120 / 127 / 220 / 230/ 240 /
260 / 277 / 347 / 380 / 400 / 417 / 480 V
AC
Intrinsic error: ±(0.2 % of measured value. + 5 digits)

Table of Contents

Other manuals for Fluke 1735

Related product manuals