1735
Users Manual
34
21 Switch between the individual phases
4 5 Switch between the representation modes:
- P and Q
- P and S
- P and PF
- P and cos ϕ
- P and D
Analyzing the measured values of the recorder function:
Use of the key cursor. When you invoke the cursors you can probe the graphs
and display the associated values. With 21 you can select the individual
phases again.
Logging
In the Logging (Record) mode, the following values are recorded for every
phase (L1, L2, L3)
• Active power (P)
• Apparent power (S)
• Reactive power (Q)
• Power factor (PF)
• Cosine (cosϕ)
• Distortion power (D)
• Accumulated values (kWh, kVAh, kVARh)
These values can be recorded in the instrument, downloaded and evaluated
with Fluke Power Log software package.
Note
The cursor functions are only available in the Hold mode.
Events
Select Events with the rotary switch.
To Next Page
Loading...
