Power Logger
Measuring Functions
27
• Current (I) and the value of the
• Frequency (F)
These values can be recorded in the instrument, downloaded and evaluated
with the Fluke Power Log software package
Measurement
If you select this measuring mode you will see the following display:
edx024.bmp
21 Use this switch to get the following values:
- minimum of values
- maximum of values and 4 5
- frequency or neutral-conductor current
With Hold/Run the actual values “freeze” and the measurement is stopped or
started again.
Save
With Save/Enter you will get a screenshot and thus store the actual picture of
the display in the memory location subsequently shown.
To Next Page
Loading...
