1735
Users Manual
8
Using the SAVE and CURSOR Keys
Pressing the ENTER/SAVE SCREEN key saves the current picture as a
screenshot.
Since it is a screenshot, a saved picture cannot be modified or edited with the
cursor.
The cursor control keys (4 5 2 1) are activated once you are in HOLD
mode.
Pressing the CURSOR key starts cursor mode. Press 4 and 5 to move the
cursor and read the current values on the display.
Pressing the CURSOR key in the recording mode sets a reference cursor.
Screenshots can also be taken in cursor mode.
Pressing ESC exits cursor mode and returns to the hold mode.
Connectors
Fluke flex inputs
Voltage inputs for
L1, L2, L3, N
AC - adapter
RS-232 Interface
Battery
compartment
edx006.eps
Figure 3. Power Logger Connectors
To Next Page
Loading...
