Power Logger
Measuring Functions
37
edx030.bmp
21 Switch between the individual phases.
4 5 Switch between V and I.
With Hold/Run the values displayed at the moment “freeze” and the
measurement is stopped or started again. By pressing the cursor key, you will
go into cursor mode, where you can read additional values of the individual
harmonics. With 21 you can select the individual harmonics. Once the
cursor mode is activated, the scale can be changed with the 4 5 from 100 %-
50 % to 50 %-25 % or 10 %-5 %.
To Next Page
Loading...
