Documenting Process Calibrator
Safety Information
7
Safety Information
This calibrator is designed and tested in accordance
with CAN/CSA C22.2 No. 1010.1-92, ANSI/ISA
S82.01-1994, UL3111 and EN610-10:1993. Use the
calibrator only as specified in this manual, otherwise
the protection provided by the calibrator may be
impaired.
A Warning identifies conditions and actions that pose
hazards to the user; a Caution identifies conditions
and actions that may damage the calibrator or the
equipment under test.
Symbols used on the calibrator and in this manual
are explained in Figure 2.
To Next Page
Loading...
