""""'I
0
static
awareness
0 A Message From
John Fluke Mfg. Co., Inc.
Some semiconductors and custom IC's can be
damaged
by
electrostatic
discharge
during
handling. This notice explains how you can
minimize the chances
of
destroying such devices
by:
1.
Knowing that there is a problem.
2.
Learning the guidelines
for
handling them.
3.
Using the procedures, and packaging and
bench techniques that are recommended.
The Static Sensitive (S.S.) devices are identified in the Fluke technical manual parts list with the symbol
"©"
The following practices should be followed
to
minimize damage
to
S.S.
devices.
1.
MINIMIZE
HANDLING
2.
KEEP PARTS IN ORIGINAL CONTAINERS
UNTIL
READY FOR USE.
3.
DISCHARGE PERSONAL STATIC
BEFORE HANDLING DEVICES
4.
HANDLE
S.S.
DEVICES BY THE BODY
Page 1
of
2
--,--------.,-·--------~·-·
-
To Next Page
Loading...
