5.
USE ANTI-STATIC CONTAINERS
FOR
HANDLING AND TRANSPORT
6.
DO
NOT
SLIDE S.S. DEVICES OVER
ANY SURFACE
7.
AVOID PLASTIC, VINYL AND STYROFOAM®
IN WORK AREA
PORTIONS REPRINTED
8.
HANDLE
S.S.
DEVICES ONLY AT A
STATIC-FREE WORK STATION
9.
ONLY ANTI-STATIC TYPE SOLDER-
SUCKERS SHOULD BE USED.
10.
ONLY GROUNDED TIP SOLDERING
IRONS SHOULD BE USED.
Anti-static bags, for storing
S.S.
devices
or
pcbs
with these devices on them, can be ordered from the
John Fluke Mfg. Co., Inc
..
See section 5 in any Fluke
technical manual for ordering instructions. Use the
following part numbers when ordering these special
bags.
John Fluke
Part No.
453522
453530
453548
454025
Bag Size
6" x 8"
8"
x 12"
16"
x
24"
12" x 15"
WITH PERMISSION FROM TEKTRONIX, INC.
AND GENERAL DYNAMICS, POMONA DIV.
\'lo)
Dow Chemical
Page 2 of 2
J0089A-07U7906 Litho in U.S.A.
•""""!"'"''
"1
I r--
------r----~-:
To Next Page
Loading...
