CORRECTIVE MAINTENANCE
7-41
It Is also possible
that a delayed failure or “winding" effect may cxx^ur. When this
happens, the
component will fail
anywhere between two hours to six months later.
When storing and
handling static>sensitive components, the normal precautlor^ for
these devices are
recommended.
Handling and servicing static-sensrtlve assemblies and
components should be done
only at
a
static free workstation
by qualifted personnel.
CAUTION:
Testing, handling, and mounting call for special attention.
Personnel handling
static-sensitive devices should normally be connected to ground
via a high-
ohmic resistor.
To Next Page
Loading...
