Fluke 93 User Manual

2
•
14
CHARACTERISTICS
CHARACTERISTICS
SPECIFICATIONS
ADDITIONAL INFORMATION
2.14
AUTO SETTING
•
Settling
time 3s
The default values
are indicated
(Model 97 only).
If this can be
changed with the
aid
of
the SETUP
(auto-set) menu, tnis is
shown.
Selectable
mode of
opefatl<xi
(Model 97 only) Selected
@
in^al
setup.
Complete
•
Display functions
Channel Baseline
mid screen
One channel display.
Separate
A
=
+ 1 div 1
B
a -
1 dlv
1
Dug^ Channel display.
X-position
zero
SETUP: not affected
(Model 97 only).
Y-posil[ion zero
SETUP:
not
affected
or separation
(Model 97
only).
X-expand
X 1
A vs B off
SETUP: not affected
(Model
97 only).
•
Cursors
not affected
if
cursors
are on a not the selected
channel, Channel A. SETUP: not
affected (Model 97 only).
Mathematics off
SETUP: not affected
{Model 97 only).
•
Text Not affected Except for actual
setting, that is
adapted (Model 97 only).
Trace identification
on SETUP:
OFF (Model
97
only).
•
Vertical
AcQuisition
Y deflection source Every
source having a
thggerable signal at its Input
Channel
A if no trigger is found.
Input coupling
ac SETUP: not
affected
(Model 97 only).
Y deflection
Each channel is independently set.
Input
voltage
> 20 mV approx.
5
dIv
Input voltage < 20
mV Channel at 200 mV/dIv Due to trigger
uncertainty at freq.
> 2 MHz Of
at duty cycle
<>
50%
sensitivity can deviate from
above,
but signal will remain on the screen.

Fluke 93 Specifications

General

Brand	Fluke
Model	93
Category	Measuring Instruments
Language	English