Introduction
Overview of Features
1
1-3
• Sends stored test reports to a host computer or directly to a serial printer.
• Includes a stored library of common test standards and cable types for copper
and fiber installations. Flash EPROM accepts test standard and software
upgrades.
• Allows for configuration of up to 4 custom test standards.
• High Definition Time Domain Crosstalk (HDTDX
)
analyzer locates the
position of crosstalk problems on a cable.
• Produces plots of NEXT, ELFEXT, PSNEXT, PSELFEXT, attenuation, ACR,
PSACR, and RL. Shows NEXT, ELFEXT, PSNEXT, PSELFEXT,
attenuation, ACR, and PSACR results up to 350 MHz. Gives remote results
for NEXT, PSNEXT, ACR, and RL.
• Optional DSP-LIA013 adapters let you monitor network traffic on
10/100BASE-TX Ethernet systems, monitors impulse noise on twisted pair
cable, helps you identify hub port connections, and determines which
standards are supported by a hub port connection.
• Tone generator lets you use an inductive pickup device, such as the Fluke
Networks 140 A-Bug Tone Probe, to identify cables in a LAN installation.
• Optional link interface adapters let you test additional types of LAN cable.
To Next Page
Loading...
Need help?
General
