DSP-4000 Series
Users Manual
1-2
Overview of Features
Note
New features may be available with software upgrades. Visit the
Fluke Networks website at www.flukenetworks.com or contact your
Fluke Networks representative for information on upgrades.
The Fluke Networks DSP-4000 Series LAN CableAnalyzers™ (hereafter referred
to as “the test tool”) are hand-held instruments used to certify, test, and
troubleshoot coaxial and twisted pair cable in local area network (LAN)
installations. The test tool combines test pulses with digital signal processing to
provide fast, accurate results and advanced testing capabilities up to 350 MHz.
The test tool includes the following features:
• Certifies LAN basic link and channel configurations to IEEE, ANSI, TIA, and
ISO/IEC standards.
• Optional Fiber Test Adapters lets you certify LAN basic fiber links to
TIA/EIA and ISO/IEC standards.
• Presents test options and results in a simple menu system.
• Presents displays and printed reports in English, German, French, Spanish,
Portuguese, Italian, or Japanese.
• Runs all critical tests automatically. Diagnostic routine helps you identify and
locate faults.
• Produces 2-way Autotest results.
• “Talk” feature allows 2-way voice communication between the main and
remote units over twisted pair cable or over fiber using a Fiber Test Adapter.
• Model DSP-4000 stores at least 500 text-only test reports in nonvolatile
memory. Model DSP-4100 stores at least 250 grapical test reports on a
removeable memory card.
To Next Page
Loading...
Need help?
General
