Fluke CableIQ - Additional Resources for Cable Testing Information; Knowledge Base Access; Unpacking the CableIQ Tester; Included Accessories

Additional Resources for Cable Testing Information
3
Additional Resources for Cable Testing
Information
The Fluke Networks Knowledge Base answers common
questions about Fluke Networks products and provides
articles on cable testing techniques and technology. To
access the Knowledge Base, log on to
www.flukenetworks.com, then click SUPPORT >
Knowledge Base at the top of the page.
Unpacking
The tester comes with the accessories listed below. If
something is damaged or missing, contact the place of
purchase immediately.
For the latest list of options and accessories visit the
Fluke Networks website at www.flukenetworks.com.
Note
CableIQ Reporter software is available on the
Fluke Networks website
CableIQ Advanced IT Kit (CIQ-KIT)
• CableIQ Qualification Tester with detachable wire
map adapter
• Four AA alkaline batteries
• IP200 IntelliTone tone probe
• 9 V battery
• Six remote ID adapters, ID numbers 2 through 7
• Two patch cords, 8-pin modular plug to 8-pin
modular plug (RJ45 to RJ45), 2 m
• Patch cord, 6-pin modular plug to 6-pin modular
plug (RJ11 to RJ11), 15.2 cm
• Coaxial patch cord, F-connector to F-connector, 75 Ω,
1.5 m
• Universal adapter, 8-pin/4-pin modular jack to
8-pin/4-pin modular jack
• F-connector barrel adapter
• USB cable for PC communications
• Folding pouch for accessories
• Hard carrying case
• Getting Started Guide
• CD-ROM with CableIQ Reporter software and
product manuals