MicroScanner Series
Cable Verifiers
Users Manual
58
Test Modes
Performance Specifications
Cable test
Measures length, verifies wiremap, identifies remote ID locators, and detects Ethernet ports.
Shows results on one screen.
Tone Generates Intellitone
™
and normal analog toning signals
PoE
MicroScanner
2
: Solicits and detects the presence of 802.3af compatible PoE (Power over
Ethernet) devices.
MicroScanner PoE: Solicits and detects the presence of 802.3af, at, and bt (single and dual).
Shows the class of power reported by the switch and the wattage specified for the class. Uses
802.3 Link Layer Discovery Protocol (LLDP) when necessary to determine the switch’s power.
Cable types tested
Twisted pair: UTP, FTP, SSTP
Coaxial (MicroScanner
2
): 75 Ω, 50 Ω, 93 Ω
Length test
Range: 460 m (1500 ft)
Resolution: 0.3 m (1 ft)
Typical accuracy: ± 4% or 0.6 m (2 ft) whichever is greater. NVP uncertainty is an additional
error.
Calibration: User-settable NVP for twisted pair and coax (MicroScanner
2
). Can determine
actual NVP with known length of cable.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
