Specifications
59
Wiremap test
Detects single-wire faults, shorts, miswires, split pairs, and up to seven far-end adapter IDs.
The wiremap is drawn with proportional length to visually indicate the approximate location
of faults.
Ethernet port detection
MicroScanner
2
: Detects the advertised speed of 802.3 Ethernet ports with speeds of 10 Mbps,
100 Mbps, and 1 Gbps.
MicroScanner PoE: Detects the advertised speed of 802.3 Ethernet ports with speeds of
10 Mbps, 100 Mbps, 1 Gbps, 2.5 Gbps, 5 Gbps, and 10 Gbps.
LLDP negotiation
MicroScanner PoE uses LLDP on 10/100 Mbps Ethernet networks to discover and negotiate
PoE when necessary.
Tone generator
Supports toning and cable mapping with a Fluke Networks digital IntelliTone
™
probe.
Generates four tones compatible with typical analog probes.
SmartTone
™
feature gives positive identification of cables in bundles when using an
IntelliTone or an analog probe.
www.GlobalTestSupply.com
Find Quality Products Online at: sales@GlobalTestSupply.com
To Next Page
Loading...
