Fluke VT650 - Battery and Sensor Safety; Battery Handling and Charging Safety

Gas Flow Analyzer
Safety Information
3
• Batteries contain hazardous
chemicals that can cause burns or
explode. If exposure to chemicals
occurs, clean with water and get
medical aid.
• Do not disassemble the battery.
• Repair the Product before use if the
battery leaks.
• Use only Fluke approved power
adapters to charge the battery.
• Do not short the battery terminals
together.
• Do not disassemble or crush battery
cells and battery packs.
• Do not keep cells or batteries in a
container where the terminals can
be shorted.
• Do not put battery cells and battery
packs near heat or fire. Do not put in
sunlight.
• Remove the battery if the Product is
not used for an extended period of
time, or if stored in temperatures
>50 °C. If the battery is not removed,
battery leakage can damage the
Product.
W Caution
To prevent possible damage, remove
the O2 sensor if the Product is stored
in temperatures >50 °C.