Gas Flow Analyzer
Maintenance, Service and Calibration
35
Maintenance, Service and
Calibration
The Analyzer requires little maintenance or
special care; however it is a calibrated
measuring instrument and should be treated
with care.
W Caution
To prevent damage to the Analyzer or
adverse affects on the Analyzer
performance, do not drop the Analyzer
and avoid mechanical abuse that could
cause a shift in the calibrated settings.
Fluke Biomedical recommends storing the
Analyzer in the carry case. Do not store the
Analyzer where there is vibration.
During use, always use the external flow filter on
the main airflow channel inlet. The filter helps
reduce turbulence and keeps out small particles
that could damage the flow sensor.
Cleaning
Clean the exterior of the Analyzer occasionally
with a cloth dampened with a mild detergent
solution. To remove stains and clean the
Analyzer, use a solution of 70 % isopropyl
alcohol. Fluke Biomedical does not recommend
any other solvents.
W Caution
To prevent damage to the Analyzer or
adverse affects on the Analyzer
performance, do not spray liquid directly
on the Analyzer. Do not immerse the
Analyzer.
To Next Page
Loading...
Need help?
General
