Fluke VT650 - Low Pressure (+ and -); Ultra-Low Pressure (VT900 Only)

VT650/VT900
Users Manual
14
Low Pressure (+ and -)
Measure differential low pressure between the +
and - ports or gauge pressure on either port.
Connectors are barbed hose fittings.
WCaution
To avoid damage to the Analyzer and
avoid adverse affects on the Analyzer
performance:
• To avoid damage to the sensor,
make sure applied pressure does
not exceed 5 psi.
• Measure only dry gases with the
low-pressure port. Do not use this
port to measure fluid pressure.
Ultra-Low Pressure (VT900 only)
The ultra-low pressure port has a barbed hose
fitting connection.
WCaution
To avoid damage to the Analyzer and
avoid adverse affects on the Analyzer
performance:
• To avoid damage to the sensor,
make sure applied pressure does
not exceed 5 psi.
• Measure only dry gases with the
ultra-low-pressure port. Do not use
this port to measure fluid pressure.