Gas Flow Analyzer
Operations
25
• *Use on Power-Up—Make the selected
profile the default profile.
• Back—Go to the main Profile menu.
•Edit Name—Change the name of the
selected profile.
• Load—Select a profile to load. If there are no
saved profiles, the option is Default.
• Save—Saves the current profile.
Setup Menu
Use the Setup menu to make and view the
Analyzer settings.
To setup the Analyzer, select Menus > Setup.
For Setup selections, see Table 4.
Table 4. Setup Menu
Setup Description
Gas Select the type of gas. See Table 5.
Correction Mode
Select the type of Gas correction (temperature and pressure) to different
gas standards. See Table 6.
To Next Page
Loading...
