Fluke VT650 User Manual

Gas Flow Analyzer
Test Setup
17
Expiratory Test Connections
For expiratory connections, see Figure 7.
1. Connect the expiratory hose from the test
lung to the flow inlet on the Analyzer.
2. Use a standard breathing hose to connect
the ventilator to the exhaust port on the
Analyzer.
The Analyzer shows the flow of gas
delivered by the ventilator.
Figure 7. Expiratory Breathing Circuit Connections
FLOW
INLET
±
300 lpm
FLOW
EXHAUST
ULTRA
LOW FLOW
LOW
PRESSURE
ULTRA
LOW PRESSUR E
0 TO 10 mbar
HIGH
PRESSURE
750 ml /min 160 mbar0.8 TO 10 bar
GAS FLOW ANALYZER
VT900
Inspiratory Hose
Ventilator
Inlet
Exhaust
Expiratory Hose
Test Lung

Fluke VT650 Specifications

General

Brand	Fluke
Model	VT650
Category	Measuring Instruments
Language	English