Gas Flow Analyzer
Specifications
39
• To keep foreign debris from entering
the Analyzer, use flow and pressure
protective caps when transporting
the Analyzer.
• To keep the Analyzer under
warranty, make sure the Analyzer is
calibrated by qualified service
personnel only.
Specifications
Specifications are based on a one year calibration cycle and apply
to ambient temperature 18 °C to 28 °C unless stated otherwise.
Display ....................................7 in, 800 x 480 touchscreen LCD
Communications .....................USB, Micro-B Device Port
Environmental Conditions
Operating Temperature ......10 °C to 40 °C
Storage Temperature..........-20 °C to +60 °C
Note
For storage temperatures below -15 °C or above
+50 °C, remove the oxygen sensor.
Operating Humidity .............10 % to 90 % non-condensing
Storage Humidity ................5 % to 95 % non-condensing
Altitude................................3000 m
Power
AC adapter
Input Voltage Range .......100 V ac to 240 V ac
Input Frequency
Range .............................50 Hz/60 Hz
DC Output.......................15 V, 2 A
Polarity............................Center positive (+)
To Next Page
Loading...
Need help?
General
