Fly Sky FS-IT4 User Manual

4 independent mixes can be applied between any master and slave channel.
Each mix, when activated, will let the slave channel be influenced by its master channel.
A fraction of the master channel, eventually negative, is added to the slave channel.
Furthermore, the slave channel can be shifted up or down by a given value.
The first menu selects the mix to modify.
The second menu selects the parameter of the previously selected mix to modify.
Master channel: select the channel that will influence the slave channel.
Slave channel: select the channel that will be influenced by the master channel.
Low side mix: set how much influence the master channel will have when on its low side
(left side for the steering channel and brake side for the throttle channel). A negative value
will influence the slave channel on the opposite direction. 50% adds half of the master to the
slave.
0% doesn’t influence the slave.
Low side mix: same as the low side mix but on the high side of the master channel (right
side for the steering channel and acceleration side for the throttle channel).
Offset: adds the offset value to the slave channel. A negative value will shift the slave
channel toward its low side.
When modifying the low side mix, the high side mix or the offset, the master channel
(at the top) and the slave channel (at the bottom) are displayed in real time.
In this example, the first mix is activated, the throttle is the master, the channel 4 is the slave
and the low side mix is set to 50% thus having the channel 4 being added half of the value
of the throttle when braking.
The activation of each of the 4 mixes function can be assigned to a push button.
The low side of each mix can be assigned to a trim switch.
The high side of each mix can be assigned to a trim switch.
The offset of each mix can be assigned to a trim switch.
17.17:
Mixes
混控
4个独立的混控可以应用于任意的主通道（混控通道）和从通道（被混控通道）之间。
激活任意混控，从通道将会受到主通道的影响。主通道的一部分（可调为负值）将被加
到从通道。此外，从通道将会根据给出的数值上下偏移。
第一个菜单选择需修整的混控。
第二个菜单选择需要修改的参数。
主通道：选择通道对从通道产生影响。
从通道：选择通道可被主通道影响。
低端混控：设置主通道低端对从通道的影响值（方向通道左端是低端，油门通道刹车端
是低端）。负值将反向作用于从通道，50%时，主通道只对从通道作用一半，0%，主
通道对从通道不起作用。
高端混控：和低端混控作用一样，设置主通道高端对从通道的影响值（方向通道右端是
高端，油门通道加速端是高端）
偏移：添加偏移值到从通道。负值可使从通道转换到其低端。
当调节低端混控，高端混控或者偏移时，主通道（顶部）和从通道（底部）将即时显示。
如图所示：第一个混控被激活，油门是主通道，4通道是从通道，低端混控设置到50%。
当刹车时，4通道将增加油门数值的一半。
任一混控功能的开启或关闭可分配给一个按键控制。
低端混控功能可分配给一个微调开关控制。
高端混控功能可分配给一个微调开关控制。
混控功能的调节可分配给一个微调开关控制。
Digital propotional radio control system
29

Fly Sky FS-IT4 Specifications

General

Brand	Fly Sky
Model	FS-IT4
Category	Remote Control
Language	English