17.23:
System
系统
The system menu sets
various system wide
parameters
Backlight timeout: set how
much time the LCD backlight
will stay on if no key is pressed
and the screen is not touched.
The longer the LCD backlight
stays on, the shorter the
battery of the transmitter lasts.
Backlight: adjust the level of
the backlight. A high brightness
can be useful in a very bright
environment like a sunny
weather. The brighter the
backlight is, the shorter the
battery of the transmitter lasts.
系统菜单设置不同的系统
范围的参数。
背光逾时：
设置在无任何操作的情
况下屏幕背光的持续时间。
屏幕背光持续的时间越长，
发射机电池的使用时间越短。
背光：
调整背光的亮度。在阳
光明媚的天气可以使用高亮
度的背光。背光越亮，发射
机电池持续的时间越短。
屏幕校准：
若触摸屏不够准确，可以
使用此功能进行校准。就是
用手写笔依次准确的点触，
屏幕四角出现的十字的中心
点，来校准触摸屏，
声音：
开启或关闭发射机声音
自动关机
开启此功能后，若当五分钟
内没有操作发射机时，发射
机将自动报警，报警时间会
持续五分钟，然后机器将自
动关闭。
报警的同时LED会闪烁指示，
点击“自动关机”可取消自
动关机功能。
Sound:
of the transmitter.
Auto power off:
After five minutes of no
operation, the transmitter
will sound an alarm and
flash its LED. After five
more minutes of no
operation, the transmitter
with automatically shut
down. Touch "Auto power
off" to cancel automatic
power off function.
Turn on or turn off the sound
Screen Calibration
This function can be used
to calibrate if touch screen
is not accurate enough.
Touch the appearing cross
center point constantly to
calibrate.
Language:
the user interface can be
displayed in several
languages.
语言：
用户界面可用多种语言显示。
Digital propotional radio control system
37
To Next Page
Loading...
Need help?
General
