The second menu selects the
target model configuration to
copy to.
Copy model:
copies a model configuration
to another. The target
configuration is lost and
replaced by the source
configuration.
The first menu selects the
source model configuration
to copy from.
Since the target model configuration is overwritten by the source model configuration,
a confirmation is requested.
In this example, after touching the Yes button, the model configuration 4 will be lost
and replaced by the model configuration 2.
Reset model:
reset all the current model configuration settings to their default. A confirmation is
requested.
In this example, the first model is selected and will be reset to its default configuration
after having touched the Yes button.
复制模型：
复制一个模型数据到
另一个模型，目标数据将
丢失，取而代之的是来源
模型数据。点触确认按钮
完成该操作。
第一个菜单选择来源
模型数据
第二个菜单选择需要复制
的目标模型数据。
来源模型数据写入到目标模型，点触确认按钮即可完成。
如图所示：点触确认按钮后，模型4的所有数据将丢失，被模型2的数据代替。
模型复位：
将所有目前模型设置复位到默认状态，点触确认按钮即可完成。
如图所示：第一个模型被选定。点触确认按钮后，第一个模型将会复位到默认状态。
Digital propotional radio control system
33
To Next Page
Loading...
Need help?
General
