Flying Voice FTA5102 - Table 6 IVR Menu Setting Options

Chapter 2 IVR Voice Prompt FTA5102/FTA5101 User Manual
14
Table 6 IVR Menu Setting Options
Operation
code
Menu Navigation
1
(1)
WAN Port
Connection
Type
1.
Pick up phone and press
“
****
”
to start IVR
2. Choose “1”, and The router reports the current WAN port connection type
3.
Prompt "Please enter password
”
, user needs to input password and press
“
#
”
key, if user wants to configuration WAN port connection type.
The password in IVR is same as web management interface login, the user may
use phone keypad to enter password directly
For example: WEB login password is “admin”, so the password in IVR is
“admin”. The user may “23646” to access and then configure the WAN
connection port. The unit reports “Operation Successful” if the password is
correct.
4.
Prompt "Please enter password
”
, user needs to input password and press
“
#
”
key if user wants to configuration WAN port connection type.
5. Choose the new WAN port connection type (1) DHCP or (2) Static
The unit reports “Operation Successful” if the changes are successful. The
router returns to the prompt
“
please enter your option
…”
6. To quit, enter “*”
(2)
WAN Port IP
Address
1. Pick up phone and press “****” to start IVR
2.
Choose
“
2
”
, and The router reports current WAN Port IP Address
3. Input the new WAN port IP address and press “#” key:
4.
Use
“
*
”
to replace
“
.
”
, for exampleuser can input 192*168*20*168 to set
the new IP address 192.168.20.168
5. Press # key to indicate that you have finished
6. Report “operation successful” if user operation is ok.
7.
To quit, enter
“
**
”
.