Flying Voice FTA5102 - Table 40 NTP Settings

Chapter 4 Web Interface FTA5102/FTA5101 User Manual
58
Telnet Port
Set the port value which is used to telnet to the device
NTP settings
Table 40 NTP settings
Field Name
Description
NTP Enable
Enable/Disable NTP
Option 42
Enable/Disable DHCP option 42. This option specifies a list of the NTP servers
available to the client by IP address
Current Time
Display current time
NTP Settings
Setting the Time Zone
Primary NTP Server
Primary NTP server's IP address or domain name
Secondary NTP Server
Options for NTP server's IP address or domain name
NTP synchronization
NTP synchronization cycle, cycle time can be 1 to 1440 minutes in any one, the
default setting is 60 minutes