Note
1.While using Voice menu, press * (star) to return to main menu.
2.If any changes made in the IP assignment mode, the router must be rebooted in order for
the settings to take effect.
3.While entering an IP address or subnet mask, use "*" (star) to enter "." (Dot) and use "#"
(hash) key to finish entering IP address or subnet mask:
4.For example, to enter the IP address 192.168.20.159 by keypad, press these keys:
192*168*20*159, use the #(hash) key to indicate that you have finished entering the IP
address.
5.Use the # (hash) key to indicate that you have finish entering the IP address or subnet mask
6.While assigning an IP address in Static IP mode, setting the IP address, subnet mask and
default gateway is required to complete the configuration. If in DHCP mode, please make
sure that a DHCP server is available in your existing broadband connection to which WAN
port of FTA5102/FTA5101 is connected.
7.The default LAN port IP address of FTA5102/FTA5101 is 192.168.11.1 and this address
should not be assigned to the WAN port IP address of FTA5102/FTA5101 in the same
network segment of LAN port.
8.The password can be entered using phone keypad, the mapping table between number and
letters as follows:
To input: D, E, F, d, e, f -- press
‘
3
’
To input: G, H, I, g, h, i -- press ‘4’
To input: J, K, L, j, k, l -- press
‘
5
’
To input: M, N, O, m, n, o -- press ‘6’
To input: P, Q, R, S, p, q, r, s -- press
‘
7
’
To input: T, U, V, t, u, v -- press ‘8’
To input: W, X, Y, Z, w, x, y, z -- press
‘
9
’
To input all other characters in the administrator password-----press ‘0’.
To Next Page
Loading...