Chapter 3 Basic Settings FTA5102/FTA5101 User Manual
Call transfer
1.Blind Transfer
Assume that call party A and party B are in conversation. Party A wants to Blind Transfer B to C:
Party A dials “*78” to get a dial tone, then dials party C’s number, and then press immediately key # (or
wait for 4 seconds) to dial out.A can hang up.
2.Attended Transfer
Assume that call party A and B are in a conversation. A wants to Attend Transfer B to C:
Party A dials
“
*77
”
to hold the party B, when hear the dial tone, A dials C
’
s number, then party A and
party C are in conversation.
Party A dials
“
*78
”
to transfer to C, then B and C now in conversation.
If the transfer is not completed successfully, then A and B are in conversation again.
Conference
Assume that call party A and B are in a conversation. A wants to add C to the conference:
Party A dials “*77” to hold the party B, when hear the dial tone, A dial C’s number, then party A and
party C are in conversation.
Party A dials “*88” to add C, then A and B, for conference.
To Next Page