Flying Voice FTA5102 - Page 22

Chapter 2 IVR Voice Prompt FTA5102/FTA5101 User Manual
16
2
phone port
configuration
1. Pick up phone and press
“
****
”
to start IVR
2. Select "2", then the device will continue to broadcast prompts the user to select
current phone number; 2. registration server address; 3. registration port; 4. call
forwarding configuration
，
5. DNS configuration ;
3. Continue pressing "1" and the unit will continue to broadcast the phone number
of the current phone port. The device will then broadcast "1. Phone number ..."
again.
3
F actory Reset
1. Pick up phone and press “****” to start IVR
2. Choose “6”, and the router reports “Factory Reset”
3. Prompt "Please enter password", the method of inputting password is the same
as operation 1.
4. If you want to quit, press “*”.
5. Prompt “operation successful” if password is right and then the router will be
in factory default configuration.
4
Reboot
1.
Pick up phone and press “****
”
to start IVR
2. Choose “7”, and the router reports “Reboot”
3.
Prompt "Please enter password", the method of inputting password is same as
operation 1.
4.
the router reboots if password is right and operation
5
W AN Port
Login
1. Pick up phone and press “****” to start IVR
2.
Choose “8”, and the router reports “WAN Port Login”
3. Prompt "Please enter password", the method of inputting password is same as
operation 1.
4. If user wants to quit, press “*”.