ADVANCED OPERATIONS IP SETUP FOR A COMPUTER OR LAPTOP
125
9 Type the following in the command line: ping 192.168.1.2. (Make sure there is a space
between ping and 192.) Press the ENTER key and a ping test is executed. The reply messages
should appear similar to the following screen.
10 Type the following command on the command line: ipconfig. Press the ENTER key. The
screen displays the Ethernet IP configuration (Adapters 0, 1, and 2)
11 Double-click the Internet Explorer icon and type the following in the address line:
ftp://192.168.1.3. Three folders should appear as shown in the following illustration. The fold-
ers are BACK (background), FORE (foreground), and MISC.
Now you are ready to import new, updated software or jpeg images to and from your MX-4.
Details about how to transfer files are described in further detail in “Transferring Files TO or
FROM the MX-4” on page 128.
To Next Page
Loading...
