Symbol meanings
The blue battery symbol with the
on/o switch symbol indicates that
wireless charging is switched o.
The blue battery symbol indicates
tha
t the mobile telephone is being
charged.
The red battery symbol indicates that
wireless charging is not possible.
T
ap the battery symbol for explanations of
the status and, if applicable, to switch on
wireless charging.
Stowage compartment cover
Depending on equipment and country, the
stowage compartment for the wireless ac-
cessory charger has a cover for the mobile
telephone’s display.
The cover can avoid distractions caused by
the mobile telephone, such as incoming
messages.
1. Place the mobile telephone in the
stowage compartment.
2. Keep the cover closed when driving so
that the mobile telephone display is
fully covered →
.
WARNING
Notifications on the mobile telephone
displa
y can distract the driver and in-
crease the risk of a serious accident.
·
Only ever place one suitable mobile tel-
ephone – Qi-capable where applicable
– without its protective cover on the
shelf in the stowage compartment.
·
Remove any items that prevent the
cover from closing.
·
Keep the cover closed at all times while
the vehicle is in motion.
WARNING
Metallic objects on the shelf can become
very hot. T
his can cause burns or fires.
·
Do not place any metal objects or items
with metallic components on the stow-
age area for the wireless accessory
charger.
·
R
emove any foreign objects immedi-
ately.
NOTICE
If cards or objects with a magnetic stripe or
chip are pla
ced on the shelf for the wireless
accessory charger, this may damage the
data stored on them.
·
Do not place any ID, bank and credit
cards etc. with a magnetic stripe or chip
on the shelf for the wireless accessory
charger.
Troubleshooting
Please refer to , and at the
s
tart of the chapter on page 221.
Mobile telephone is not charged
A message about a foreign object in the
storage tray may be displayed on the Info-
tainment system.
An unfavourable position of the mobile tel-
ephone on the lining mat can impair the
charging function. This can already be the
case in the event of small changes in posi-
tion, e.g. due to vibrations.
The position of the mobile telephone must
be corrected to re-establish the correct
charging function.
1. Align the mobile telephone centrally on
the charging area.
The charging function can also be impaired
by metal and above all magnetic parts of
a mobile telephone or its protective cover.
1. Turn the mobile telephone by around
180° and align on the charging area
with the display still facing upwards.
Sockets and charging facilities for mobile devices 225
2KF012720AE
To Next Page
Loading...
