ards for Bluetooth® technology. Pairing will
be rejec
ted if this is not the case.
1. Activate Bluetooth® on the mobile tel-
ephone.
2. Activate Bluetooth® on the Infotain-
ment system.
3. Open the app overview and tap
Select mobile phone.
T
he system starts scanning for availa-
ble Bluetooth® devices. The system
shows a list of available Bluetooth®
devices when the search has been
completed.
4. Open the list of available Bluetooth®
devices on the mobile telephone and
select the device name of the Infotain-
ment system.
5. Observe the messages on the mobile
telephone and Infotainment system
and confirm as necessary.
If pairing was successful, the data of
the mobile telephone will be stored in
the user profile.
6. Optional: confirm the message for the
data transfer on the mobile telephone.
WARNING
Carrying out the pairing while driving may
c
ause accidents or injuries.
·
Only ever pair devices when the vehicle
is stationary.
Connecting a mobile telephone
1. Pair the mobile telephone with the Info-
tainment system.
2.
Activate Bluetooth® on the mobile tel-
ephone.
If the connection is not set up auto-
matically, tap
S
elect mobile
phone and tap the name of the desired
mobile telephone.
Functional descriptions
Please refer to and on page 232
and and at the start of the chapter
on page 254.
User proles
An individual user profile is automatically
created for every paired mobile telephone.
The data from the mobile telephone (e.g.
contact data) is stored in the user profile.
A maximum of ten user profiles can be
stored in the Infotainment system simulta-
neously.
Deleting a user prole
You can delete user profiles individually un-
der Settings. Reset the Infotainment sys-
tem to factory settings to delete the stored
data completely → page 240.
1. Tap .
The user profiles are located under Se-
lect mobile telephone or Mobile devi-
ces.
2. Tap the desired user profile and tap
to delete.
Active and passive connection
At least one mobile telephone must be
connected to the Infotainment system in
order to use the functions of the mobile
phone interface. If several mobile tele-
phones are connected to the Infotainment
system, you can switch between active and
passive connections. Establish an active
connection to the Infotainment system in
order to operate the mobile phone inter-
face with the desired mobile telephone.
Paired mobile telephones are stored in the
Infotainment system even if they are not
currently connected.
Dierence between the connection
types
Mobile telephone is paired and
connected. The functions of the mo-
bile phone interface are performed
with the data of this mobile tele-
phone.
Mobile telephone is paired and
connected. Only incoming calls can
be accepted via the mobile phone in-
Active
Passive
256
Infotainment system
To Next Page
Loading...
