Ford TOURNEO CONNECT 2024 - Page 26

Display of current driving
time, c
urrent distance covered, aver-
age speed and consumption.
A display with information on the ve-
hicle status, e.g. total mileage, is
shown before starting and aer switching
o the engine.
Selecting secondary displays
1. Select the right or le secondary dis-
play area with the
or button.
2.
Select the desired secondary display
with the arrow buttons
and .
3. C
onfirm the selection with the
but-
ton.
Sho
wing or hiding secondary displays
1. Hold down the
button.
C
onguring secondary displays
You can configure the secondary displays
according to your preferences in order to
select which secondary displays are availa-
ble in the secondary display area:
1. Select the right or le secondary dis-
play area with the
or button.
2.
Use the arrow buttons
and to nav-
iga
te to the Settings menu and open
this menu.
3. Press the
button to make your
changes.
A tick indicates that the correspond-
ing sec
ondary display is activated.
4. To return to menu selection, press
the
or button.
T
he secondary displays can be config-
ured or hidden independently of each
other.
Navigation map in the digital instru-
ment cluster
Depending on equipment, the digital instru-
ment cluster may display a detailed navi-
gation map.
The size of the navigation map can be con-
tinuously adjusted. To select the preferred
map size:
Driving data
1. To open the Na
vigation display area,
press the arrow buttons
and on
the multifunc
tion steering wheel.
2. To zoom in and out, press the
but-
ton and use the arrow buttons or
to adjust the desired map size.
3.
Press and hold the
button on the
multifunc
tion steering wheel to show or
hide the secondary displays.
If warning messages about malfunc-
tions are displayed when the ignition
is switched on, it may not be possible to
adjust some settings or display information
as described. If the fault persists, go to
a suitably qualified workshop.
WARNING
Operating the instrument cluster and In-
fotainment system c
an distract you from
the road. If the driver is distracted when
driving, this can cause accidents and seri-
ous or fatal injuries.
·
Always drive with your full attention
and responsibly.
·
Never operate the instrument cluster
while the vehicle is in motion.
·
Adjust all settings in the instrument
cluster and Infotainment system only
when the vehicle is stationary.
Information displays on the digi-
tal instrument cluster
Possible displays in the main display
area of the digital instrument cluster
The main displays depend on the vehicle
equipment and may display dierent infor-
mation for the respective equipment
→ page 22:
— Outside temperature display.
— Recognised trac signs of the Advanced
Trac Sign Display function.
— Driver assistance systems → page 165.
— Gear-change indicator → page 160.
— Open doors, bonnet and boot lid.
— Speed warning for winter tyres.
— Maximum speed limit.
24 Driver information