fos4X Blackbird OECD MDE1195 User Manual

6. Commissioning
6 Commissioning
u
Observe the safety instructions. See Safety, page 9.
6.1 Commissioning the Ethernet Interface
For communication via the Ethernet interface, fos4X recommends the use of the
fos4X C API. See fos4X C API documentation.
6.2 Commissioning the Profinet Interface
To integrate the Blackbird OECD into a Profinet network, a GSDML configuration file is
required. You will receive the GSDML configuration file from fos4X.
Commissioning the Profinet Interface
u
Integrate the Blackbird OECD into the Profinet network using the GDSML file
according to the instructions of the manufacturer of the Profinet controller.
6.3 Set or change the password.
TIP
The web interface is available with firmware Version 2.65 or
higher.
Setting or changing the password:
1. Open the web-interface. See Opening the Web Interface., page 52.
2. If a password is set: Log in to the web interface.
3. Open the page SETTINGS.
4. Click on SYSTEM PASSWORD.
The page SYSTEM PASSWORD is displayed.
© fos4X 2020
MDE1195_4-10_1.3.x_5.0_Blackbird
OECD_(9CH, PRN)-en-us
49 / 76

fos4X Blackbird OECD MDE1195 Specifications

General

Brand	fos4X
Model	Blackbird OECD MDE1195
Category	Measuring Instruments
Language	English