fos4X Blackbird OECD MDE1195 User Manual

7. Operation
7 Operation
u
Observe the safety instructions. See Safety, page 9.
7.1 Monitoring Operation
In normal operation of the Blackbird OECD no operating actions are necessary.
TIP
The web interface is available with firmware Version 2.65 or
higher.
u
Monitor operation via an interface. See Software, page 26.
u
Monitor operation via an interface or the web-interface. See Opening the Web
Interface., page 52 and Software, page 26.
In case of errors see Troubleshooting, page 55.
7.2 Opening the Web Interface.
TIP
The web interface is available with firmware Version 2.65 or
higher.
Opening the web interface:
1. Connect the PC to the Profinet network where the measuring device is located.
2. Optional: Using a RJ45 cable, connect the PC to the PRN connector of the
measuring device.
3. Open a browser on the PC.
4. Enter the IP-Adresse of the measuring device in the address bar.
If the option READ ACCESS WITHOUT PASSWORD is not set, the page
AUTHORIZATION REQUIRED is displayed.
52 / 76
MDE1195_4-10_1.3.x_5.0_Blackbird
OECD_(9CH, PRN)-en-us
© fos4X 2020

fos4X Blackbird OECD MDE1195 Specifications

General

Brand	fos4X
Model	Blackbird OECD MDE1195
Category	Measuring Instruments
Language	English