fos4X Blackbird OECD MDE1195 User Manual

9. Maintenance
6. Connect the MC 1,5/ 2-GF-3,81 connector to the PWR
connector.
7. Switch on the power supply.
9.2.3 Firmware Update
9.2.3.1 Firmware Update via Web Interface
TIP
The web interface is available with firmware Version 2.65 or
higher.
Condition:
■
Firmware archive for the Blackbird OECD available.
Doing a firmware update via the web interface:
1. Open the web-interface. See Opening the Web Interface., page 52.
2. Open the page SETTINGS.
3. Open the page FIRMWARE UPDATE.
4. Click on SELECT FILE.
5. Select the firmware archive.
6. Click on OPEN.
The firmware archive is displayed in the Firmware image: field.
7. Click on UPLOAD FIRMWARE.
The status is displayed at Status:.
8. Wait until the firmware update is complete.
9. Reboot the Blackbird OECD. Turn the power supply off and on.
P
Firmware update complete.
66 / 76
MDE1195_4-10_1.3.x_5.0_Blackbird
OECD_(9CH, PRN)-en-us
© fos4X 2020

fos4X Blackbird OECD MDE1195 Specifications

General

Brand	fos4X
Model	Blackbird OECD MDE1195
Category	Measuring Instruments
Language	English