Four winns FUNSHIP - Woodwork and Composites; High-Pressure.laminate.care; Star.board; Burlwood.mahogany

Owner’s Manual Page 107Woodwork and Composits - Section Q
Woodwork and Composites
Q - 1 HIGH-PRESSURE
LAMINATE CARE
Some table tops, galley counter tops, shelving and
drawer faces consist of a high pressure laminate
material. The laminate may have either a matte
textureorsmoothnishandcanbecleanedwith
mild dishwashing soap and water or other cleaning
solutionssuchasFantastik™.Alwaysreadthelabel
before using any product.
NOTICE
DO NOT use abrasive cleaners or solvents on
formica. DO NOT use Soft Scrub™ soap or
similar cleaning products; they will scratch the
surface and remove the shine.
NOTICE
DO NOT use table tops as a cutting board.
The knife will leave gouges/marks in the
surface of the table.
Q - 2 STAR BOARD
Star board is a high density polyethylene (plastic) and
is very durable and fade resistant. Star board requires
little maintenance, and is being used in place of wood
inmanyareasoftheboat.Thell-incockpittableis
one example of where star board is used.
To clean star board, use a solvent-free, nonabrasive
cleanersuchasdishwashingsoaporFantastic™.
Read the label before using any cleaning product.
NOTICE
Star board will stain when exposed to certain
oils or chemicals. Always wipe up any spills
immediately.
Q - 3 BURLWOOD MAHOGANY
Mahogany enhancements are available on some
models.Theyconsistofanishedsyntheticburlwood
mahogany. This synthetic burlwood mahogany may
be found in the instrument gauge panels, switch
panels and ignition switch panels. Additionally, a
woodgrain steering wheel is available for most models
as a standard or optional feature. See Figure Q-1.
Figure Q-1: Woodgrain Helm Representation
Toclean,adampclothwillusuallysufce.
Q - 4 LAMINATED FIBERGLASS
Some models come with a cockpit table option which
consistsofalaminatedberglassmaterial.SeeFigure
Q-2. It can be cleaned with mild dishwashing soap
and water. Always read the label before using any
product.
NOTICE
DO NOT use abrasive cleaners or solvents on
cockpit table. DO NOT use Soft Scrub™ soap
or similar cleaning products; they will scratch
the surface and remove the shine.
NOTICE
DO NOT use cockpit table as a cutting board.
The knife will leave gouges/marks in the
surface of the table.
Figure Q-2: Cockpit Table
Q - 5 SOLID SURFACE MATERIAL
On models with a refreshment center, a solid
surface material is used for the countertop. The solid
surface gives the refreshment center a rich look and
makes for an extremely strong yet lightweight top.
It can be cleaned with mild dishwashing soap and
water,orothercleaningsolutionssuchasFantastik™.
Always read the label before using any product.
See Figure Q-3.