Four winns FUNSHIP - Alarm.systems; Compass; Instrument.maintenance

Owner’s Manual Page 59Engines and Instrumentation - Section E
K. Alarm Systems
Engine alarm systems are available on certain engine
options. The alarm is audible and is actuated by
various engine sensors. The sensors monitor such
things low oil pressure, high water temperature levels
and high exhaust manifold temperatures. Consult your
engine owner’s manual for information regarding the
specicsystemsmonitoredbythealarmifso
equipped.
L. Compass
A compass is available on certain Four Winns
®
mod-
els. The compass can provide directional information
when operating offshore, in unfamiliar waters, or in
adverse weather conditions.
The compass must be properly calibrated after all
personal equipment is installed including all electron-
ics (radio, depth sounder, etc.). DO NOT rely on the
compass readings until initial adjustment (compensa-
tion) has been performed. If the boat has a factory-
installed compass, the manufacturer’s instructions are
provided in the owner’s packet. Most areas have local
companies that specialize in compass adjustment.
If unsure of the proper compensation techniques,
consider having the adjustment done professionally
toensureaccuracyandcondenceinthecompass.
NOTICE
During use, keep all extraneous metal objects
away from the compass. The close proximity of
metal objects (e.g., beverage cans) can cause
compass deviation.
NOTICE
Four Winns continually strives to improve
its products. Unit specications, including
standard and optional equipment are constant-
ly being modied. Equipment availability is also
subject to change without notice. The most
current and accurate information available
at the time of publication is included in this
manual. Some variation in equipment,
description, location, and details can result.
M. Instrument Maintenance
Electrical protection for instruments and ignition
circuitry is provided by fuses. The fuse block is located
underneath the starboard dash on most models or on
the starboard side, below the throttle control, near the
ooronothermodels.
Periodically, spray the ignition switch with a contact
cleaner. The ignition switch and all instruments,
controls, etc. should be protected from the weather
when not in use. Four Winns offers appropriate
weather covers for each model. Excessive exposure
canleadtogaugeandignitionswitchdifculties.
DO NOT use a product such as WD-40 as
a contact cleaner. Be sure to read the label
before using any product.
Electronic gauges are affected by static electricity that
builds-up on the glass face. Periodic washing on the
gauge face with warm water and mild liquid detergent
will help eliminate the static electricity problem and
improve gauge accuracy.