Step 3: aPower
● For both floor mounting or wall mounting, a fork hand truck will be needed to lift aPower so that the installation clips on the unit
back are higher than the top of the mounting bracket.
● Adjust the angle and position of the fork hand truck, move the lift towards the mounting bracket until the mounting bracket is
completely aligned to the back clips on aPower and the wedge structures on the mounting bracket are within locking position of the
back joint on the rear of aPower.
● Lock the wheels of the fork hand truck, to prevent it from tiling or displacement.
aPower lifting
28
Special care must be taken to protect
personal safety. Reinforced toe footwear
must be used to protect the installers
in case the equipment tilts or falls.
To Next Page
Loading...
